ACCESSORIES

	C-All Observation Ports These furnace observation ports have a large viewing area (89 mm x 38 mm) and are a fully sealed unit which prevents the escape of hot gases from the combustion chamber. The unit has a ¼” cooling air connection and a heat resistant shield which closes automatically when the handle is released. The observation port is very simple to install and is virtually maintenance free. Suitable for furnace temperatures up to 1100oC. Click On Image to Download Detailed PDF File
	Peep Sights Threaded Peepsights are available in low and high temperature version. Low temperature designed for temperatures up to 170oC. High temperature version is available for temperatures up to 400oC. The high temperature model has a ¼” connection for cooling air. Click On Image to Download Detailed PDF File
	Ignition Electrodes We offer a variety of spark electrodes and flame rods. Flame rods are supplied with threaded connections - 3/8" to 3/4". Ignition electrodes - 3/4" are threaded connections and various lengths. Click On Image to Download Detailed PDF File
	Pressure Gauges High pressure gauges for air or gas up to 400 kPa are available in five pressure ranges. They utilise a Bourdon tube type movement and are not damaged by slight overpressures. The low pressure gauges use a diaphragm movement for sensitivity at low pressures. They are designed for pressures up to 14 kPa and come in three pressure ranges. Click On Image to Download Detailed PDF File
	Orifice Flow Meters Orifice flow meters are designed for measuring the flow of air and gas at pressures up to 35 kPa and temperatures up to 250 o C. Stainless steel orifice plates are available for corrosive gases or where high humidity conditions are common. Click On Image to Download Detailed PDF File
	Gas Strainers Elbow type gas strainers are rugged, cast iron strainers, suitable for gases up to 400 o C. They come in pipe sizes 1%" to 3". Click On Image to Download Detailed PDF File
	Combustion Analyzer The combustion analyser allows you to set easily and accurately the air/gas ratio on premix combustion systems thus eliminating the fuel wastage and the formation of carbon monoxide during the combustion process. They do not need calibration or a battery to operate. A standard, general purpose single phase socket, is all that is required to operate these units. Click On Image to Download Detailed PDF File
	Air Sleeves Diverging sleeves and elbows, in several pipe sizes, are available where the design requires such features. Click On Image to Download Detailed PDF File
mail@australianburners.com.au